Revolver grips

These ergonomic grips provide the best grip for average to large hands. With the slightly thicker top portion as well as the closed back strap area, these grips are pleasant to shoot with even under the toughest conditions. We recommend that smooth grips are chosen for calibers of .357 and higher so that the felt recoil is easier on the shooters hands. Grips with finger grooves fit every type of hand. For those who shoot short-barreled revolvers, we recommend grips with rounded back strap area so that the shooter has the optimal hand placement on the grip.

SW0368

Replacement grips

with closed back for revolvers

  • symmetrical
  • with finger grooves
  • square butt grip
  • round butt grip
  • thumb rest for right-handed shooters
  • thumb rest for left-handed shooters

These grips are the foundation of all ergonomic grips later developed by Nill, and they have been steadily optimised over the years. The closed back strap makes them ideal for average to long hands and when shooting in the single action mode the distance to the trigger is improved. The positive-fit moulding follows the anatomy of the hand and the finger grooves increase the contact surface of the fingers. Thanks to the somewhat broader and rounded upper closure, even shooting heavier loads is a pleasure. We recommend a smooth grip for calibres of .357 magnum and over. It allows for a slight rolling of the firearm in the hand so that the recoil energy is better absorbed.

click here to see the different versions

SW036HO8

Replacement grips

with open back

  • symmetrical
  • with finger grooves
  • angular back
  • rounded back
  • compact form

With these ergonomic Nill grips the distance between the back of the  frame and the trigger is shorter. The trigger finger automatically extends further into the trigger, making a high, double action rate of fire possible. As opposed to closed back grips, these grips, with their reduced volume, are also well suited for shorter hands. The symmetrical form is perfect for left-, right- and two-handed shooting and can be used with speedloaders. Various finishes are available.

click here to see the different versions

MR03P8

Special grips for revolvers

  • symmetrical
  • with finger grooves
  • rounded grip back
  • open and closed grip back in different Sizes from S to XXL
  • with thumb rest
  • with small fixed palm rest
  • extended version
  • with support for the little finger

These grips are modifications from our standard range of products,  developed for special needs and shooting disciplines. Many national and international titles have been won by experienced shooters using these distinctly ergonomic grips. They are available in walnut and, depending on the model, stippled or with Rhomlas®. Uncomfortable pressure points are now a thing of the past, and improved handling  comfort allows for improved results. With their strongly emphasised ergonomic moulding, these grips fit comfortably and feel as if they  merge with the hand. They are available in stippled walnut for left- and  right-handed shooters.

click here to see the different versions

SW0361AM

Replacement grips

made from exclusive materials

  • symmetrical
  • with finger grooves
  • square butt grip
  • round butt grip
  • open grip back
  • compact size

In very limited quantities, exotic woods and also ivory*² are used during normal production runs, and then finished as special, exclusive and  unique grips. Such very valuable and attractive materials are rare and not always available. They are classified according to quality and rarity. Each receives a special screw (double sided screw head with slot and rosette). Since there are many tolerance differences even in the same  model of revolvers, we recommend that you let us use your revolver for  an exact fitting.

click here to see the different versions

SW02ORGCB7

Replica grips for revolvers

  • reproductions
  • classic

We are often asked to produce replica grips for older revolver models, in conformance with original designs. These grips are produced on a  limited edition basis. They may also fit newer models so long as the frame tolerances have remained the same.
For collectors of fine handguns we have created several classic style grips in traditional design from premium quality woods. These grips are made in limited series with close attention to detail to grace your firearm and return it to its original appearance.

click here to see the different versions

MR021

Matchgrips for revolvers

  • adjustable, with or without finger grooves
  • non-adjustable in standard sizes (80, 85, 90, 95, 100 mm)
  • orthopaedic from plastics moulding

The most important connection between the shooter and the firearm is the grip. Only when this connection is perfect the revolver can be evenly held, shot for shot, in the hand. With decades of practical experience in the workshop and training at the shooting range, Wilfried Nill and his employees have exactly the wherewithal to optimise the hand position of a firearm. The ergonomically formed grips meet the specifications of the International Olympic Association, the ISSF and other organisations.  Over the hand, the horn (beavertail) runs toward the wrist and fixes the hand from above. Therefore these grips should not be used with  magnum loads (no warranty for calibres over .38 special).

click here to see the different versions